Cute Red Panda

The Head simply snaps into place.   ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: Classic Detect thin walls: - Brim: No! BuildPlate: - Info‼: Do not scale the Red Panda any smaller otherwise the connections will no longer work! ------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------   Colors and filament I used (4 Colors): PLA Basic/Matte / DarkRed or Orange PLA Matte / Red PLA Matte / Black PLA Matte / White Or decide for yourself which colors and how many you want to use!   ℹ This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!    ------------------------------------------------------ ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling! (Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.) Boost MeIf you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!