Black Hole Lamp

UPDATE: The cords now feeds out of the lamp behind the stand to make it more discreet. The contact surface between the lamp and stand was also increased for a stronger gluing bond.   This is a light up display lamp that looks like a black hole. It requires only two colors of filament and an LED Lamp Kit 001. Use the adhesive pad that comes with the kit to secure the light in the lamp so it doesn’t accidentally fall out of place. This model does also print in multiple parts that will need to be glued together (I recommend using super glue or 3D Gloop). Make sure the parts are properly aligned, the light is securely in place with the adhesive pad, and the cord is fed out of the back of the lamp before attempting to glue everything together. Precise gluing is required. Use the print settings specified for each part (these settings should already be applied in the provided 3mf). Print Settings "LightFront" and "LightBack": white or clear filament 100% infill enable brim with a very low brim-object gap and consider applying adhesive onto the build plate to prevent warping optional: enable supports "BlackParts": black filament 100% infill enable supports "Stand": 5-15% infill 3 wall loops