Broom Holder - Customizable size

Broom Handle Holder v3 - customizable size This is a parametric version of Broom Handle Holder v3, Everything that was in that version is in here, with the added bonus, you can now choose the diameter (from 14mm) and the height you want.   For diameter smaller than 20mm, the printed model will be 20mm and the bumper will be taller to compensate for the difference   - Just click Customize to get started and print the broom holder that fit your needs. - Download your customized .STL - Load the print profile in bambu studio - Replace the model inside the print profile with yours   You can also download your customized 3mf and adjust the settings in the slicer yourself or copy the one provided as example   Once your model is in the slicer, "Right click", “Split to objects” Without moving the parts, Select the Base and the two Arms, then “Right click”, “Merge”. Move the bumper on another plate and select your materials. To assemble: Position the broom holder Use screws in the counterbore hole, tighten them with a screwdriver through the fronts holes Optionally, print the buttons for your chosen diameter in TPU. They will plug the holes in the jaw and provide friction and keep the handle from sliding.  Also you can use double sided tape like 3M VHB for screwless mounting.