Flakpanzer IV Kugelblitz Anti‑aircraft Tank 1/35

Kugelblitz, which translates to “ball lightning”, was Germany’s last‑minute experimental self‑propelled anti‑aircraft gun of WWII. Mounted on the Panzer IV chassis, it carried twin 30 mm MK 103/38 autocannons inside a distinctive fully‑enclosed spherical turret. Only a small pre‑production batch was built, and the vehicle never saw widespread combat service before the end of the war. ================================   📋 Recommended Print Settings (For Best Results)  Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.  Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.  Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.  Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.  🔧 Assembly Diagram Notes  Blue Lines: Require super glue for assembly. I use Gorilla Super Glue.  Yellow Lines: These are moving parts. Do not apply glue here.