Pokemon #179 - Mareep kit card

Bring the magic of Pokémon to life with this Mareep kit card!   This model prints flat and transforms into a fully assembled ~75mm display figurine of Mareep that can stand on its own. Simply print, pop the pieces out, and assemble. Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Given the eye whites and the wool share the same color a very light color is suggested for a better final look Assembly Notes: There are a grand total of 7 pieces. The small connectors are all throwaways The head piece includes a “B” on the side that should point towards the back / tail Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below should provide step by step instructions, but feel free to ask if something is not clear!