Cute Ganesha-Inspired Mouse Offering Figurine

Recommended Print Settings Please review the complete sliced preview before starting the print, as results may vary depending on the printer, filament and model size. Printer: Bambu Lab FDM printers Nozzle: 0.4 mm Filament: PLA / PLA+ Layer Height: 0.12 mm for high detail Initial Layer Height: 0.20 mm Wall Loops: 3 Top Shell Layers: 5 Bottom Shell Layers: 4 Infill: 15% Gyroid Supports: Tree/Organic Supports Support Placement: Build plate only where possible Support Threshold Angle: 30° Brim: 5–8 mm if required for better adhesion Seam Position: Back Variable Layer Height: Recommended around the face, hands and decorative details Print Speed: Standard or Silent Mode is recommended for improved surface quality Model Orientation: Keep the base completely flat on the build plate Scale: Use uniform scaling only; do not stretch or compress individual axes Important Pre-Print Checks Before printing, please slice the complete model and carefully check: Confirm that the pedestal/base is completely flat on the build plate. Review every layer in the sliced preview for missing sections or floating islands. Confirm that supports are generated under all critical overhangs. Carefully inspect the face, hands, crown, jewellery and other delicate decorative details. Ensure all thin accessories are properly connected and visible in the sliced preview. Check that no support starts directly on an important facial or decorative surface unless necessary. Confirm that the selected model size is suitable for your nozzle. Very small scaling may cause fine details to disappear. Check the estimated filament usage, print time and build-plate clearance. Make sure the correct build plate and filament profile are selected. Run a single-colour test print before attempting a multi-colour version. For the best result, use dry filament, a clean build plate and slower outer-wall speeds. Please do not start printing until the complete sliced preview has been checked from the first layer to the final layer. A charming Ganesha-inspired mouse figurine celebrating Indian traditional art and devotional aesthetics. The character wears an ornamental golden crown, traditional dhoti and jewellery while holding an offering tray in a welcoming pose. Designed as a decorative 3D-printable collectible for festive displays, prayer-room décor, Indian cultural decoration and spiritual gifting. The rounded character design, expressive face and detailed pedestal make it suitable for display on desks, shelves and home mandirs. This is an original artistic interpretation inspired by traditional Indian visual elements. It is a mouse character and not a direct representation of Lord Ganesha. For personal, non-commercial use only. Selling physical prints, modifying or remixing the model, redistributing its digital files, or uploading it to another platform is prohibited under the Standard Digital File License.