38TPC lifting ammo box

Ammo box for 50x .38TPC ammo. Easy to take the bullets out by lifting 5 up per row. Just with 2 fingers lift up and twist it to the from, so they keep in place then. When you always struggling to get the shells out, this is the solution. Open the lid and lift up the rows you like to take the ammo, no hassling, also when you have no nails. Small nice box with text .380 auto on top.   Watch out: 3 Plates, Plate 2 has a stop in it on 1.5hour to put the lifers inside, then resume printing.   So First Plate: print the 10x lifter before starting printing the second plate with the main frame (HAVE 10 GOOD ones) !!!!!!! Otherwise you can't put in the lifters inside the frame anymore. Plate 3 is the lid with text and the Inlay   No Tools , supports ore any crews need.   Please choose the colors you like to print. This frame is almost same as for the 9mm but only 1mm les hight. The inlay, you have to bent it to put it into the base frame, watch out for the chamfer put the right way! The lid you have to put from underneath up into the frame till you have a click, then you can turn it over, the 2 bals slide into the grove up with some tension.   please check my other creations, i also have also the .22 a 9mm , .357 magnum, .380auto and .45 ACP version here on Makerworld. Boost Me (for free) This work took me a lot of time and a lot to figure out how it can work,  If you like it you can always boost me.