Vegeta - Prince of All Saiyans - Ki Float Edition

👑⚡ Vegeta - Prince of All Saiyans - Ki Float Edition (230mm Diorama & Key Tray) "There is only one certainty in life. A strong man stands above and conquers all!" Bring the unyielding pride of the Saiyan Prince to your setup with this dynamic Vegeta Levitation & Ki Charge Diorama! Captured mid-air in a floating battle stance with clenched fists and ready to power up, Vegeta features his classic Saiyan battle armor, white gloves, contoured boots, and spiky black hair, hovering over a massive, rugged rocky crater base that doubles as a functional desk catchall / key tray. Standing at a grand 230mm total height (23cm), this project is split into a smart two-piece assembly system for seamless support generation and maximum structural durability. 📦 Print Profiles & Smart 2-Piece Architecture 🧩 2-Piece Angled Cut & Connector Peg Assembly Why It’s Split: Both the multi-color and single-color versions are divided into two parts (Figure and Base) via an engineered angled cut featuring an integrated alignment connector peg. Zero Base Scarring: This allows Vegeta to be printed on the build plate with support trees starting directly from the print bed rather than damaging the detailed rock base underneath. Assembly: Apply a few drops of CA superglue into the peg joint to permanently lock the floating figure into the rocky terrain. 🔹 Profile 1: Multi-Color Edition (230mm / 0.20mm / 3 Wall Loops) Height: 230mm (23cm) | Layer Height: 0.20mm. 🛡️ 3 Wall Loops Optimization: The figure of Vegeta is pre-configured with 3 wall loops (instead of standard 2).Material Durability Note: Bambu PLA Matte Marine Blue is a visually stunning shade, but can be brittle and prone to crumbling if printed with standard thin perimeters. The 3-loop reinforcement provides solid structural strength across the legs, knees, and torso. 5-Color Filament Mapping (BOM):⬛ Charcoal Black (Matte): Hair, eyebrows, pupils, and the entire rocky base. 🔵 Marine Blue (Matte): Saiyan jumpsuit / bodysuit. ⚪ Jade White (Basic): Armor chest plates, shoulder straps, gloves, boots, and eye whites. 🟡 Lemon Yellow (Matte): Armor chest ribs and boot toe accents. 🏽 Beige / Skin: Mapped as Bambu PLA Beige in the slicer profile (Physically printed using Filoprint Skin PLA). 🔹 Profile 2: Single-Color Classic (230mm / 0.16mm) Height: 230mm (23cm) | Layer Height: 0.16mm. Filament: Bambu PLA Basic Light Gray. Best For: Ultra-high definition single-filament displays or for miniature painters wanting maximum surface resolution. 🔑 Dual-Purpose Base Feature The wide, heavy crater base provides solid stability and serves as a stylish functional desk valet tray / key tray (appoggiachiavi) for your daily essentials. 🛠️ Support Removal Guide 🧹 CLEANUP NOTE: Supports detach effortlessly from the main body, armor edges, and boots. ✊ Clenched Fists & Hands: Snip the support interface contacts directly underneath the knuckles and wrists with micro flush cutters before removing the surrounding support trunks. 👤 Neck & Jawline: Gently clip the small support branch under the chin to ensure a clean neckline without applying twisting force.   🐢 Master Roshi - Max Power Edition            💥 Son Goku - Kamehameha Stance with 悟         📂 Browse All My collection HERE 👇   Boost Me❤️ Support My Work If this model was useful to you, please consider giving it a **Boost**! 🚀 It helps me buy more filament to test and design new functional parts. *Happy Printing!*Technical & Creative Note: This design is based on an AI generation that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.