Tiled horrors - Slate style hueforge

The horror tiles - slate style hueforge  Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT PLEASE NOTE IF YOU GET A WARNING NOTIFICATION FOR FLOATING PLEASE IGNORE SUPPORTS ARE NOT REQUIRED WITH HUEFORGE You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.32mm and the Actual Thickness is 1.6mm     #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1     #5b6579 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.2     #ffffff PLA sunlu white  Transmission Distance: 6.8 This print uses 3 unique filaments Swap Instructions:     Start with Sunlu Matte Black     At layer #8 (0.72mm) swap to BambuLab Basic Blue Gray     At layer #11 (0.96mm) swap to sunlu white for the rest.