LIFE SIZE CUSTOM ALIEN EARTH SUN BASKING EDITION

👽 LIFE SIZE CUSTOM ALIEN BRO – EARTH SUN BASKING EDITION (1000mm WIDE) After seeing so many alien models being made, I decided it was finally time to make my own custom Alien Bro! 👽 This weird, creepy, ridiculously detailed little guy is designed in a crazy stretched-out pose, with an oversized alien head, enormous eyes, elongated limbs, detailed hands and feet, and an anatomy that looks like he definitely did not evolve on Earth. And honestly… why keep him indoors? 😂 Print this little guy in ASA or PETG, throw him in your backyard, and let him bask in the Earth's beautiful sunlight like the extraterrestrial he is.  🌎☀️👽 At approximately 1000mm wide — 1 meter across, Alien Bro makes for one seriously unusual indoor or outdoor display piece.   Boost MeIts Free :D    📏 SCALE & SIZE Overall Width: 🔥 1000 mm (~1 meter / ~3.28 ft) • Large-format display scale • Approximately 1 meter wide • Custom original alien design • Dynamic stretched pose • Designed for indoor or outdoor display • Perfect conversation piece • Extremely unusual garden decoration   🖨️ PRINT-READY CUT SYSTEM   Total Parts: 30 Parts Cut Size: 256 × 256 × 256 mm This is one complete Alien Bro model, simply divided into 30 printable pieces so the entire creature can be produced on a 256mm-class build volume. The cuts are designed to make the large 1000mm-wide model practical to print, transport, and assemble. Includes: • 30 precision-cut printable pieces • Dowel alignment holes between cuts • Designed around a 256 × 256 × 256mm build volume • Clean cut locations • Easy part alignment • Complete model assembled into one finished creature 🔩 DOWEL ALIGNMENT SYSTEM The dowels are used specifically to help align the 30 cut pieces during assembly. They help with: • Accurate alignment between cuts • Easier positioning • Cleaner seams • Preventing pieces from shifting during gluing • Maintaining the original shape of the model Important: This is not a modular character system — the model is one complete sculpture that has simply been cut into printable sections. Recommended: • Test-fit each piece before gluing • Sand dowels slightly if the fit is too tight • Use epoxy or strong adhesive for permanent assembly • Allow each connection to cure fully   👽 CUSTOM ALIEN DESIGN This is my own custom Alien Bro design, created specifically to be something completely different from the usual alien models. Features: • Oversized extraterrestrial head • Huge expressive eyes • Small alien facial features • Extremely elongated limbs • Exposed muscular anatomy • Long fingers • Detailed hands and feet • Thin stretched body structure • Dynamic floating / crawling pose • Organic alien anatomy   🧠 ALIEN HEAD The oversized head gives Alien Bro his unmistakable extraterrestrial appearance. Features: • Huge smooth alien cranium • Massive eyes • Small sculpted facial features • Detailed mouth area • Organic facial transitions • Strange extraterrestrial proportions • Smooth high-detail sculpting   🧬 EXTRATERRESTRIAL ANATOMY The entire body has been designed with an intentionally strange alien anatomy. Features: • Defined rib and chest structure • Sculpted abdominal forms • Long stretched torso • Extremely elongated arms • Extended legs • Organic muscle transitions • Detailed tendons • Sculpted joints • Thin alien limbs   🖐️ LONG ALIEN HANDS The hands feature long stretched fingers that complement the creature's unusual proportions. Features: • Long alien fingers • Detailed knuckles • Sculpted joints • Organic hand anatomy • Extended wrist structure • High-detail transitions   🦶 ALIEN FEET The feet continue the exaggerated extraterrestrial design. Features: • Long alien toes • Detailed foot anatomy • Sculpted tendons • Organic ankle transitions • Extended lower limbs   🌎 THE BACKYARD ALIEN Okay… this is where things get fun. 😂 Print Alien Bro in ASA or PETG, put him outside, and let this little extraterrestrial enjoy his new home planet. Imagine walking into your backyard and seeing a 1-meter-wide alien casually chilling in the sunlight. 🌎☀️👽   "Don't worry guys… he's just getting some vitamin D." 😂 For outdoor use, ASA is especially recommended because of its better resistance to UV exposure and weather compared with many common PLA materials.   🖨️ PRINT RECOMMENDATIONS Layer Height: 0.16 – 0.20 mm   For Maximum Detail: 0.12 – 0.16 mm   Walls: 4–6   Infill: • Large body pieces → 5–10% Gyroid • Standard pieces → 10–15% • Dowel areas → 20–30%   Material Suggestions: 🔥 ASA – Recommended for outdoor display • UV resistant • Weather resistant • Excellent for backyard displays   💪 PETG – Excellent Alternative • Strong • Durable • Good outdoor performance • Easier to print than many ASA setups PLA is perfectly fine for indoor display, but ASA or PETG is the way to go if Alien Bro is actually going outside.   ⚠️ PRINT DIFFICULTY Intermediate–Advanced Reasons: • 30 total pieces • Large 1000mm overall width • Long thin limbs • Large head • Detailed hands and feet • Multiple cut connections • Dowel alignment required • Large horizontal sections may require careful orientation   🧱 SUPPORTS Supports may be required around: • Head underside • Arms • Fingers • Legs • Feet • Chest overhangs • Body underside • Complex cut sections Tree supports are recommended where appropriate to protect the organic sculpted surfaces.   🏗️ ASSEMBLY ORDER Suggested build process: 1️⃣ Print all 30 pieces 2️⃣ Sort the pieces according to their position 3️⃣ Test-fit the dowels 4️⃣ Dry-fit the complete Alien Bro 5️⃣ Begin joining the largest body sections 6️⃣ Attach the limbs 7️⃣ Install the head 8️⃣ Align the hands and feet 9️⃣ Check the complete silhouette 🔟 Glue all permanent connections 1️⃣1️⃣ Allow the complete model to cure 1️⃣2️⃣ Put Alien Bro outside and let him meet the Earth sun. 😂☀️👽   🎨 PAINTING IDEAS   🛸 Classic Alien Bro   Body: • Pale grey • Light green • Blue-grey • Muted alien skin tones   Eyes: • Gloss black • Deep glossy blue • Dark reflective finish Anatomy: • Darker recessed shading • Subtle muscle highlights • Organic shadow washes   ✨ OPTIONAL SCI-FI FINISH • Glossy black eyes • Subtle green highlights • Dark blue-grey recesses • Wet-look skin finish • UV-reactive paint accents • Light weathering • Outdoor-aged appearance   ☀️ OUTDOOR DISPLAY NOTES If you're actually putting Alien Bro outside: ASA is the preferred choice for long-term outdoor use. Recommended: • Use ASA for exposed pieces • PETG is an excellent alternative • Apply an appropriate outdoor clear coat after painting • Secure the finished model properly • Protect the long fingers and toes from accidental impacts • Keep the creature securely mounted in windy conditions   ⚖️ STABILITY NOTES Because the completed creature is approximately 1000mm wide, make sure the final display location is secure. Important: • Use a stable display surface • Properly glue the cut sections • Reinforce major joints if required • Ensure dowels are fully seated • Consider additional reinforcement for outdoor use • Secure the model against strong wind   🔥 DISPLAY PRESENCE This custom Alien Bro makes an incredible: • 👽 Backyard alien display • 🌎 Sci-fi garden decoration • 🛸 UFO-themed installation • 🎮 Gaming room centerpiece • 🧪 Workshop specimen • 🎬 Sci-fi prop • 🏠 Indoor conversation piece • 😂 Extremely confusing thing for your neighbors to discover   💡 FINAL THOUGHTS • 👽 1000mm / 1-meter-wide custom alien • 🧬 Completely custom Alien Bro design • 🧩 30 total printable pieces • 📐 256 × 256 × 256mm cut size • 🔩 Dowel alignment system • 🛸 One complete model simply cut into printable sections • 👁️ Oversized alien head and eyes • 🖐️ Long detailed alien hands • 🦶 Detailed alien feet • 💪 Highly sculpted extraterrestrial anatomy • ☀️ Perfect candidate for outdoor display • 💪 ASA / PETG recommended for backyard use • 🖨️ Designed for large-format 3D printing After seeing everyone making aliens… I had to make my own. 😂 Meet Alien Bro. He's 1 meter wide, has absolutely no idea what he's doing here, and he's ready to spend the rest of his existence basking in the Earth's sun. 🌎☀️👽 Welcome to Earth, little bro. 😂🛸   Boost MeIts Free :D