Michelangelo TMNT - No AMS (Updated Version)

Boost MeIf you enjoy this model, I'd really appreciate a Boost. It helps support future designs. Happy printing!Michelangelo TMNT (Updated Version) - No AMS So many people requested Michelangelo, so I made an updated version! 🐢 This updated version has a better-proportioned head size, similar to my Donatello, Leonardo, and Raphael models. ✅ Easy to print & assemble ✅ Easy assembly ✅ Current size: ~130 mm ✅ No AMS required ✅ Michelangelo's signature nunchucks included Important Notes Supports are required for some parts. I adjusted several connection points to improve the fit. Most parts should snap together, but some may require glue depending on your printer tolerances. If a part is too tight or loose, adjust the individual part scale by 2–3%. The model can be scaled down by 10–15% or scaled up without limit. Eye Parts I included separate white eye pieces with pupils on the last two plates. If you're printing the model at the current ~130 mm size, I don't recommend printing the last two plates because the eye pieces are very small. For the regular eye piece included on the other plate, you can simply use a black marker to add the pupil. If you scale the model up, you can use the separate eye pieces from the last two plates for better detail. Assembly The model is designed for easy assembly. Most parts should snap together, although some parts may require glue depending on your printer tolerances. Please refer to the model pictures for assembly reference.   Checkout my other Ninja Turtle models Donatello TMNT - No AMS   https://makerworld.com/en/models/2915391-tmnt-ninja-turtle-donatello-no-ams-multiparts#profileId-3261175   TMNT – Raphael No AMS https://makerworld.com/en/models/3177969-tmnt-raphael-no-ams-updated-version#profileId-3593920   TMNT Ninja Turtles- Leonardo No AMS