Son Goku - Kamehameha Stance with 悟 Back Kanji

💥 Son Goku - Kamehameha Stance with 悟 (Go) Back Kanji (170mm Statue & Scenic Base) "KAA-MEE-HAA-MEE-HAAA!" Bring the legendary Earth-raised Saiyan to your showcase with this dynamic Son Goku Kamehameha Charge Statue! Captured in his iconic low-stance energy gathering pose, this sculpt features Goku’s classic torn-edge martial arts dogi, muscular forearm anatomy, flowing belt sash, spiky black hair, and an intricately embedded 悟 ("Go" / Wisdom) Kanji emblem custom-modeled directly across the back of his gi. Standing at 170mm tall (17cm), the model is self-balanced to stand rock-solid on its own, with an optional crater display base provided for dramatic diorama setups. 📦 Print Files & Profiles Architecture 🔹 Profile 1: Multi-Color Edition (170mm / 0.20mm) Height: 170mm (17cm) | Layer Height: 0.20mm. 6-Color Filament Mapping (AMS / Multi-Material):🟠 Orange: Dogi martial arts uniform. 🔵 Navy / Marine Blue: Undershirt, belt sash, wristbands, and boot gaiters. 🟡 Yellow: Boot laces and ankle/collar trim. ⬛ Black: Hair, eyebrows, eyes, and the circular Kanji border/lettering. ⚪ White: Kanji background disc & eye sclera. 🏽 Skin Tone: Selected in the BOM / Slicer as Bambu PLA Beige (Note: The test photos were printed using Filoprint Skin PLA, but Bambu Beige / Latte Brown are fully compatible drop-in replacements). 🔹 Profile 2: Single-Color Classic (170mm / 0.16mm) Height: 170mm (17cm) | Layer Height: 0.16mm. Best For: Fast single-filament prints (e.g., PLA Basic Light Grey) with maximum surface definition, or as a pristine canvas for miniature painters. 🔹 Profile 3: Scenic Crater Display Base Features: A cracked, blasted-earth crater base featuring negative foot imprint cutouts for easy alignment and gluing. Standalone Option: Goku’s boot soles are leveled with a low center of gravity—the figure stands securely on flat surfaces even without using the base. 📁 Raw STL Downloads: Standalone character STL only. 🧠 Smart Slicer Geometry: Hair Tip Stabilizers 💡 BUILT-IN LAYER-SHIFT PREVENTION: The tall, spiky hair tendrils feature custom micro-cylinder stabilizers (primitives) integrated directly into the .3mf profile at the apex of the tips. These small contact pads anchor the hair spikes against printhead vibration and eliminate layer-shifting caused by weak support pillars. They snap off effortlessly during cleanup, leaving crisp, sharp hair tips. 🛠️ CRITICAL Support Removal Warning (The Blue Belt Sash!) ⚠️ MATERIAL & GEOMETRY POST-PROCESSING NOTE: While supports on the single-color version release cleanly and sturdily, extra care is required around the belt sash on the multi-color print. 🥋 Floating Belt Sash (High Caution Zone): The floating blue belt ribbons at the waist are thin and subject to shear stress (PLA Matte Navy Blue tends to be slightly more brittle between thin interfaces than PLA Basic Grey). Do NOT pull support trunks downward or outward with hand force! Extraction Method: Use fine micro flush cutters to snip the support interface tips directly beneath the belt knot and hanging sash ends before pulling the main support tree away. 🩹 Quick-Fix Tip: If the belt ribbon happens to crack during extraction, a tiny dab of CA superglue reattaches it seamlessly along the seam line. 🖐️ Fingers & Cupped Palms: Snip the support interface points between the cupped palms and fingers individually before clearing the arm columns.   🐢 Master Roshi - Max Power Edition        👑⚡ Vegeta - Prince of All Saiyans - Ki Float Edition            📂 Browse All My collection HERE 👇   Boost Me❤️ Support My Work If this model was useful to you, please consider giving it a **Boost**! 🚀 It helps me buy more filament to test and design new functional parts. *Happy Printing!*Technical & Creative Note: This design is based on an AI generation that I have manually refined and tested on FDM prints to ensure printability and quality. The featured photo is of the actual physical print. I’ve included AI-colored renders only as a visual reference for those who wish to paint the miniature.