Articulated Humpback Whale

Check out my Patreon for more awesome models and benefits!   Meet the Articulated Humpback whale!  It is super cute, very easy to print, and doesn't require any support material or post processing.   The multicolor version requires a toolchanger or an automatic filament swap system (MMU, AMS, CFS or similar). It is not possible to print the 3  color version in multiple parts and then assemble it. Dimensions (LxWxH) 200 x 128 x 34 mm (100% scale) 7.9 x 5.1 x 1.3 in (100% scale) Included Files I've included two .3mf project files for Bambu Studio (1 color and 3 colors), as well as raw .stl files for best compatibility with other slicers. Material  PLA Layer height  0,2 mm Infill >15% Support None. This model doesn't require any support material. Scaling The model should print fine up to 50% of the original scale.  Orientation Default, laid flat on the belly Adhesion aid Unnecessary, the contact surface with the buildplate should provide sufficient adhesion. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible but not recommended, as it would be too difficult and inconvenient to remove afterwards. All resolved issues with the model files and detailed information about their fixes will be listed in this section. If you're having any problems which aren't on this list, please visit the Known issues section below. If you don't see your problem mentioned there as well, please leave me a message with more details about your issue, I will address it as soon as possible. There currently aren't any known issues/work in progress. If you run into any, please contact me via dm. My models are free for personal, non-commercial use. If you want to sell, or monetize them in any other way, please visit my Patreon for more licensing options.