C-130 & E-2 Car AC Vent Spinner | No AMS Needed

The requested C-130 propeller spinner is here!  This is a replica of the wicked looking 8 bladed propeller on the C-130 aircraft used by air forces all around the world.  The C-130 is used for cargo hauling, refueling, and even attack with the AC-130 variant that fires massive 105mm artillery shells from the air.  You can snap this spinner on to your car's AC vent and it will spin. Fitting to your car Provided with the model are 3 different sizes of connectors from 1 (small), 2 (medium), 3 (large).  Easiest way to find the right fit is to print all 3 and then see which of the 3 fits the mostly securely to your car's AC vent.  Then use that connector to attach the propeller. Once you've tested the fit, assembly takes seconds 1. Insert the connector into the base like you see below. 2. Then connect together the base, propellers, and nose by pushing them together. 3. Finally, just simply push the propeller onto your AC air vent blade like you see below (where the black part is the AC vent blade)   Bambu filaments used Use any filaments you want for each piece to make it your own.  If you live in a hotter climate and plan to leave this in the car, then I would recommend printing this in PETG instead of PLA or if you live in a very hot climate, then ASA/ABS.  Those plastics have better temperature resistance. But, if you are looking for the filaments used in the model photos: Basic Silver Matte Yellow Matte White Basic Light Gray