TMNT – Raphael No AMS (updated version)

Boost Me🐢 Enjoyed the model? Please consider giving it a free boost! It really helps support my work and future designs. Thank you! ❤️Raphael TMNT (Updated Version) - No AMS So many people requested Raphael, so I made an updated version! 🐢 The previous version had a larger head. This updated version has a better-proportioned head size, similar to my Donatello and Leonardo models. ✅ Easy to print & assemble ✅ Assembly guide included ✅ Current size: ~125 mm ✅ No AMS required ✅ Raphael's signature sai included Important Notes Supports are required for some parts. I adjusted several connection points to improve the fit. Most parts should snap together, but some may require glue depending on your printer tolerances. If a part is too tight or loose, adjust the individual part scale by 2–3%. Scaling up is recommended. Scaling down is not recommended because some parts are already very small. Eye Parts I included separate white eye pieces with pupils on the last two plates. If you're printing the model at the current ~125 mm size, I don't recommend printing the last two plates because the eye pieces are very small. For the regular eye piece included on the other plate, you can simply use a black marker to add the pupil. If you scale the model up, you can use the separate eye pieces from the last two plates for better detail. Assembly The body uses two connectors: Upper and lower body Upper and lower shell sections Michelangelo will be coming later! 🐢 If you enjoyed the model, please like, download, follow, and boost. I'd love to see your prints!