Luxury Jewelry Box

Luxury Jewelry Box   Elevate your collection with this luxury mechanical jewelry box . Designed with high-precision segmented folding doors and integrated LED lighting, this build features a secret compartment built into the base and a fully modular back wall. Customize your storage layout using a variety of interchangeable wall parts and specialized hangers for rings, watches, chains, and accessories.   Features Kinetic Folding Doors: Precision-engineered mechanical shutter doors that glide open and closed seamlessly. Modular Back Wall: Tailor your interior storage using a variety of interchangeable wall pieces and custom hangers for watches, rings, chains, and earrings. Secret compartment Base: Concealed push-lid built into the lower frame for discreet storage. Built-in Lighting Setup: Integrated top recess designed specifically to fit standard puck/LED lights to illuminate your collection. (ø65mm) Hardware-Assisted Durability: Built using smooth metal guide rods and magnets for a satisfying, tactile snap action. STEP: I have added the STEP file for the back wall part so you can customize your own module. 3D Printed Parts List Knobs: x2 Pins for Top Part: x2 (Press fit these into the guide holes near the front) Base: x1 Base Lid: x1 Top: x1 Back Wall Pieces: x13 (Mix and match your preferred hanger styles and layout) Door Segments: x26 Non-3D Printed Hardware Required 2x Metal Rods: 6mm diameter x 350mm long Neodymium Magnets: 8x2mm (For door closure and drawer retention) Glue: CA glue / Superglue (For knobs, rods and magnet insertion) Optional: Small battery-powered LED puck light for top illumination channel Filament used: Pla Matte - Dark brown Pla Matte - Dark chocolate Pla Matte - Caramel Pla silk + - Gold Assembly Tips: Assembly guide:  Follow the assembly guide down below. Magnets: Make sure the polarity of the magnets are in the correct orientation before final glue. Alignment: Ensure your steel rods are clean and straight for the smoothest door rotation. Supports :  Make sure all the supports are removed before assembly. Tolerance : Printers and filaments can behave differently. In rare cases, the holes can be a bit to tight because of settings.   If this happens, i recommend using a drill with a 6mm drill bit. Just run it through the hole a few times and you should be fine.    You can find the steel rods you need here  →   (affiliate link) If Bambu i out of stock, Led lamp kit 001 alternative → (affiliate link) If Bambu i out of stock, KC007 alternative → (affiliate link) 8X2mm Magnets → (affiliate link)    One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below. Each individual part is marked with a number, making it very easy to assemble.   Enjoy the process.