Goku vs Vegeta Hueforge

Goku and Vegeta have one of the most iconic rivalries in Dragon Ball. Goku is driven by his love of fighting and the constant desire to test his limits, while Vegeta's Saiyan pride pushes him to prove that he can surpass his longtime rival. What began as a battle between enemies eventually became a rivalry built on competition, respect, and the shared drive to become stronger.   Boost Me🐉⚡Fuel my creativity with a boost! Each boost sparks new ideas and pushes my designs to the next level. Your support drives innovation! 🟠🔵  This VS-style set puts the two Saiyans face-to-face, with Goku represented in orange and Vegeta in blue. Each side is its own separate 200x200mm print profile, allowing you to print Goku and Vegeta individually before displaying the two plates together as one 400x200mm battle scene.   Frames for Display: 100x100 Hueforge Display Desk Organizer Wall Frame for 200x200 prints 200x200 Standing Desk Frame 100x100 Standing Desk Frame   Print Details This model contains 2 separate 200x200mm print profiles. Print both plates and place them side-by-side to complete the Goku vs Vegeta scene. Print Settings for Both Plates 100% infill Layer Height: 0.08mm Base Layer: 0.16mm Base Thickness: 0.88mm Max Thickness: 2.40mm Actual Thickness: 2.40mm Plate 1 - Goku Filaments Used PLA BambuLab Basic Black - Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray - Transmission Distance: 3 PLA BambuLab Basic Jade White - Transmission Distance: 5 PLA BambuLab Basic Orange - Transmission Distance: 7 This plate uses 4 unique filaments. Swap Instructions Start with Black At layer #11 (0.96mm), swap to Blue Gray At layer #13 (1.12mm), swap to Jade White At layer #19 (1.60mm), swap to Black At layer #20 (1.68mm), swap to Orange for the rest Plate 2 - Vegeta Filaments Used PLA BambuLab Basic Black - Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray - Transmission Distance: 3 PLA BambuLab Basic Jade White - Transmission Distance: 5 PLA BambuLab Basic Blue - Transmission Distance: 4 This plate uses 4 unique filaments. Swap Instructions Start with Black At layer #11 (0.96mm), swap to Blue Gray At layer #13 (1.12mm), swap to Jade White At layer #19 (1.60mm), swap to Black At layer #20 (1.68mm), swap to Blue for the rest