Moonspell - Cute Bat ornament (hanging)

This is Moonspell, a little Halloween inspired cute bat made to add a touch of spooky magic wherever you hang it.    Use it as an ornament on a Halloween tree or centered on a door wreath, clip it to a backpack, or hang it from your car’s rearview mirror.   Size: 13cm x 8cm   The only pre-painted details in the model file are the eyes. The silver and gold accents shown in the photos are hand paint idea suggestions only and are not included as Pre-set colors in the model file. For an easy metallic finish, I recommend using wax Rub ’n Buff lightly over the raised details—it really makes all the moons, stars, and botanical patterns pop.   Printing Use a clean print plate with some glue (unless you are using a super tack plate) Use dried out filament(Different filament types impact the print differently, please adjust your settings accordingly.   Support Removal: Let the model cool down before removing the supports. Use pliers when removing the supports. Break/crush the support branches closest to the head and under the wings, this will loosen the support up and make it easier to remove. Move to removing the support around the wings, gently twisting to the side/ pull downwards while holding the wings securely with one hand.  The rest of support remaining (if not already fallen off) should be easy to remove with similar method as above.  I have tried to adjust the support settings for minimal impact, but different filament can impact how hard it attaches so some sanding might be needed. Seem steps can also leave a rougher area which might be needed to be gently sanded.  Light sanding and gentle, controlled heat may be needed to clean up areas where the supports were attached on the backside. I used a handheld mini torch, but apply heat carefully to avoid warping or damaging the print.   If you like this design, please leave a rating, a comment or a boost.   Boost MeNo tricks—just a tiny Boost treat, please! o worries if you can't boost, a rating or a comment is very much appreciated as well! 💛