Spider-Man Brand New Day Universal Inhibitor

Universal Mutant Inhibitor Chip — Spider-Man: Brand New Day Smooth edges, enhanced details, accurate screw heads and placement, no AI sculp, movie accurate, fully restored details, fully modular or 100% printable in one piece, if you want- 50% hand assembled.. however you want it. just get that 0.2 mm nozzle ready.    Peter Parker's Universal Mutant Inhibitor Chip, fully 3D printed and built to display like a real MCU prop. This is a complete modular kit — every part of the inhibitor is broken into swappable versions so you can build it the easy way (100% printed, no tools) or go full prop-maker with a real PCB, real wires, and a glowing core.\ What's in the kit Inhibitor Body — choose 1 of 3 builds Wired version — wiring is modeled directly into the print. Requires AMS (or manual filament swaps) to print the wire channels in a second color/material. No-wire, printed-screw version — fully self-contained, no hardware needed. 3D printed screws hold it together. Open version — no wires, no screws molded in. Use this one if you want to add real wires and either a real or printed PCB for a hybrid build. PCB Chip — choose 1 of 3 builds Fully printable chip, wires included in the print Fully printable chip, no wires (add your own real wire for extra detail) Carve-out chip — use the included Dremel jig to cut a real PCB blank and seat it into the printed inhibitor for an authentic circuit-board look I'm aware that I probably modelled the chip colors wrong (they apparently aren't green lol). So please feel free to swap whatever colors you like.    I am grinding down and de-soldering the USB C port on one of these for mine- Buy PCB here    Glow Core A small glow-tag insert that lights up the piece. Glues into place after printing.   Clear Vial / Fuse Piece The clear tube that reads as the "fuse" of the inhibitor. Prints hollow and glues into the final assembly. For this piece I actually cut the clear part of a pen's ink-tube.  Build difficulty Fully buildable in PLA. Every part prints on a 0.2mm nozzle except the glow core, which needs a 0.4mm nozzle since glow-in-the-dark filament won't reliably flow through a 0.2mm nozzle. No resin required — this is a full FDM build but please feel free to add the STLs to your resin printers.   Mix and match the body, chip, and PCB options to match your skill level and how "practical effects" you want to go