Welder LED Lamp - Functioning Flicker Weld Light!

LED Welder Lamp - Flickering Weld Light!   Really excited about this next model drop. Last week while working on gluing together my next life-sized print an idea came to my head.. after a short search on amazon I had some parts ordered for a test print. The idea? A welder LED lamp that actually looks like welding is happening! After a few design iterations here is my first V1 of this lamp! It came out so awesome that I'm already scrambling for some “V2” updates/rework that would make this even larger, but also more finished-looking!    Please note that some very minor wiring is required. This model uses a 3mm, 12v Blue Flickering LED that can be sourced on amazon (amazon.com/dp/B0DBZCJP3G?ref=ppx_yo2ov_dt_b_fed_asin_title) as well Bambus MH001 LED lamp kit!. The parts (other than the flicker LED) are tagged in the BOM in this upload.  The assembly is very straight forward, you will just need to add a dab of glue to the vertical LED support beam where it presses into the base. The LED simply presses into the holder, with cable guide/retention channeling provided to tuck the cable away. The flicker LED needs to be spliced to the USB adapter and simply pressed into the cut out from inside of the pipe. You will need to use a small screw driver to firmly press it into place so that it is fully seated, and visible outside of the pipe. For added visual effect I connected a second LED and just left it loose inside of the pipe so that the insides also illuminate as it flickers!.      The awesome part about this lamp is that you can run the lights separately, and either illuminate both lights at the same time, or choose whether you want to turn on the overhead light or the weld light by itself!  I printed my complete model in Matte Black PLA material and applied some Antique Gold Rub'n Buff wax to the welder for added color/contrast.