Dragon Tumbler Sleeve

🐉 Dragon Tumbler Sleeve – 20oz Skinny Bring a little dragon magic to your favorite tumbler! 🐲🔥 This 3D-printed sleeve is designed specifically for 20oz skinny tumblers, featuring a detailed dragon-inspired design with wings that wrap around the tumbler and a curved tail that adds an extra touch of character. The sleeve gives your tumbler a unique fantasy look while providing a fun, decorative grip. The dragon wraps naturally around the tumbler, creating a design that looks great from every angle.   Printing Notes: Printed in PLA, but other materials may work depending on your printer and the fit you prefer. For the best results, make sure your 20oz skinny tumbler matches the dimensions used when designing the sleeve. Whether you're a dragon lover, fantasy fan, or just want something unique for your tumbler, this sleeve is a fun way to turn an ordinary cup into something that looks like it belongs in a dragon's hoard! 🐉✨ If you print one, I'd love to see your makes! Please consider sharing a photo and rating the model on MakerWorld. ❤️   🔧 Fit Adjustment Instructions If the sleeve feels a little too loose on your 20oz skinny tumbler, don't worry! You can easily adjust the fit using a heat gun and painter's tape. Place the sleeve onto your tumbler and determine how much you would like to tighten it. Using a heat gun on a low setting, gently warm the PLA around the sleeve. Keep the heat gun moving constantly and avoid concentrating heat in one area. Use painter's tape to temporarily hold the sleeve in the desired position and shape. Once the PLA becomes slightly flexible, gently press or shape the sleeve tighter against the tumbler and readjust the tape. Allow the sleeve to cool completely while held in position. Remove the tape and check the fit. Repeat the process in small increments if needed. ⚠️ Important: PLA can deform quickly when overheated. Use low heat, keep the heat gun moving, and work slowly. Heating the tumbler itself, can make it easy to warp the pla BUT it can make it more difficult to keep the dragon in place. Tip: Painter's tape works wonderfully for holding the sleeve in place while shaping and helps prevent accidentally scratching the tumbler.   if you have any questions, shoot me a message!