357 MAGNUM ore 38 SPECIAL lifting ammo box

Ammo box for 50x  .357 magnum ore .38 special ammo. Easy to take the bullets out by lifting 5 up per row. Just with 2 fingers lift up and twist it to the from, so they keep in place then. When you always struggling to get the shells out, this is the solution. Open the lid and lift up the rows you like to take the ammo, no hassling, also when you have no nails. Small nice box with a small text 9mm on top. No Tools ore any crews need. Watch out: 3 Plates, Plate 2 has a stop in it on 1.5hour to put the lifers inside, then resume printing. So First print the 10x lifter before starting printing the main frame (HAVE 10 GOOD ones) !!!!!!! Otherwise you can't put in the lifters inside the frame anymore.   the frame for .357 magnum and .38 special are same, but only different is the text on the lid, choose the one you like. I know there is a 2mm diffrence, but for the lifting it don't matter. Pleas choose the colors you like to print. The inlay, you have to bent to put it into the base frame, watch out for the chamfer put the right way! The lid you have to put from underneath up into the frame till you have a click, then you can turn it over, the 2 bals slide into the grove up with some tension.   please check my other creations, i also have also the .22 a 9mm and .45 ACP version here on Makerworld. Boost Me (for free) This work took me a lot of time and a lot to figure out how it can work,  If you like it you can always boost me.