ZTQ-15 Light Tank Cage Armor 1/35 Scale

================================   The top cage armor and turret are designed to be glue-free so they are easy to remove.   ================================   📋 Recommended Print Settings (For Best Results)  Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.  Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.  Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.  Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.  🔧 Assembly Diagram Notes  Blue Lines: Require super glue for assembly. I use Gorilla Super Glue.  Yellow Lines: These are moving parts. Do not apply glue here.         Fold it along the groove, and apply glue to the seam to secure it.