Modern Voronoi Wall Clock organic or circular

Boost MeIT'S TIME FOR A BOOST!Upgrade your space with this modern Voronoi Wall Clock, designed to merge the clean precision of 3D printing with the warm, natural aesthetics of wood or preserved moss. Whether you want a fully 3D-printed clock or a premium hybrid build using a laser-cut faceplate, this set includes 4 distinct frame variations and 2 faceplates to fit your style. 🧩 The 4 Frame Models (Mix & Match) Frame_Organic_Open: Dynamic edge following the Voronoi pattern with open mesh. Frame_Organic_Closed: Dynamic edge with closed pockets (designed to be filled with moss, resin, or accent material). Frame_Circular_Open: Classic round outer rim with open Voronoi mesh. Frame_Circular_Closed: Classic round outer rim with closed pockets for moss or resin. 🪵 The 2 Faceplates (3D Print OR Laser Cut) Faceplate_Organic: Designed for the Organic Frame series. Faceplate_Circular: Designed for the Circular Frame series. (Note: Faceplates can be 3D printed using the provided 3MF/STL files or laser cut out of 3mm plywood/acrylic using the included SVG file!)   ⚡ Laser Pro-Tip: If you decide to go with the wooden version, you can turn the wood panel into a canvas—engrave your favorite designs or photos and make this clock a truly one-of-a-kind piece! 🌿 Custom Infill for Closed Versions Unleash Your Creativity: In the closed version, you can fill the pockets with preserved moss, epoxy resin, or whatever makes it look best to you! 🔄 Interchangeable Modular Design Easy to Swap: The faceplate isn't permanently glued! If you get tired of a color or material, you can easily swap the front panel anytime for a new 3D printed color or a fresh piece of wood. 🔑 Features & Integrated Wall Mount Built-in Hanging Hole: The back of each frame features an integrated mounting hole with a screw head recess for easy, flush wall hanging. Press-Fit: Designed for a snug fit so you can switch faceplates whenever you like. 🖨️ Recommended Print Settings Layer Height: 0.20 mm (0.16 mm for smoother top layers on Voronoi edges) Walls/Perimeters: 2 Infill: 15% – 20% (Gyroid or Grid) Supports: no needed, but if you want you can add the supports.. NO HARD SUPPORTS REQUIRED — Practically no supports needed! Only two tiny, super easy-to-remove supports. If you like this design, please leave a Like, Rating, or upload a picture of your Make! Your support means a lot.