Tabletop Gaming Terrain Kit - Volcanic Rocks

Tabletop Gaming Terrain - Volcanic Rock Scatter Kit ***Note - This model is different than the previous Volcanic Scatter terrain.*** Miniature Rock Terrain Formation for DnD and any other tabletop game.  As shown: Printed in Sunlu High Speed PLA (not + or 2.0) - Gray   Scales to any size but printed as shown in Bambu Studio Slice pic: Plate 1 - 135mm peak height, 179g of filament, 9hour 28minute est print time. Plate 2 - 108mm peak height, 86g of filament, 5hour 39minute est print time. This is meant to be treated as a Volcanic Rock Kit! The contents of plate 2 are from plate 1. The model from plate 1 was expanded in width and then cut near the base. Close enough to give all rocks size, but far enough that all rocks are now separate. Scale this mode to any size you need and cut the rocks you want from it to bring your tabletop to life!     Resize the model to meet your needs, make your cut and a message will pop up informing you that there are now non-manifold edges and asking to repair. Say yes and allow it to repair, this will seal the bottoms of the newly cut away rocks so they can be stand alone terrain scatter.    This model was created with a 5% infill, low for normal models but perfect to save filament on terrain. As shown it is printed in the .16 Layer height option, but will improve in quality with a .12 Layer Height. Keep in mind doing this will increase the print time considerably, but if you plan to paint it can be worth it.   With the settings included it will print with supports. Many will come off as you lift the model from the plate, the remaining few will pop off with no tools required. Very easy supports!   Plate 1   Plate 2   If you have any questions drop a comment on the model and I will respond as soon as I am able.   Boost MeIf you appreciate the model, consider a boost!     The miniatures shown in the image are also available! Paladin with mace and tome: https://makerworld.com/en/models/2943728-paladin-oath-of-redemption#profileId-3297204   .2mm version shown Paladin with shield and sword: https://makerworld.com/en/models/2936970-paladin-oath-of-watchers#profileId-3288726 .2mm version shown Mounted Knight: https://makerworld.com/en/models/3025789-adventurers-camp-of-the-breach#profileId-3400086 .2mm version shown Elf Wizard: https://makerworld.com/en/models/3010457-elf-wizard-32mm-ttrpg-miniature#profileId-3381024 .4mm version shown Female Barbarian: https://makerworld.com/en/models/3079249-human-barbarian-32mm-ttrpg-miniature#profileId-3467816 .2mm version shown Male Human Fight: https://makerworld.com/en/models/3040751-human-fighter-32mm-ttrpg-miniature#profileId-3419216 .2mm version shown Male Tiefling Warrior: https://makerworld.com/en/models/3010427-tiefling-warrior-32mm-ttrpg-miniature#profileId-3380988 .4mm version shown Male Knight with Greatsword overhead - Not released yet.