Jack Skellington - Pumpkin King

Jack Skellington, Pumpkin King   As a request from a user and a fun one to model, The Pumpkin King himself, Jack skellington, with pumpkins and Zero the dog for company. The figure is able to stand on his own with no base, but i made a base to attach him, zero and some pumpkins to. Holding high a pumpkin with a smile on his face in awe of the spooky season.   Perect for Nightmare before Christmas lovers, or as a general decoration for the spooky season, or all year round! NO AMS, printed in parts and assembled, all that is needed is some time and some glue to keep everything together permenently. The main figure is 22cm tall and with base and pumpkin in hand he is around 24cm tall.    Assembley is simple and intuative. I have had to paint on a decent amount of supports for the hands and coat bottom as they are quite thin a delicate and fail easily if not given plenty of support. I managed to print them multiple times now and support removal is fairly eay as the hands will just come away from the supports in most cases. Just be careful and use some side cutters to ently pry anything stuck too well.   📌 Recommended printing settings: Material: PLA Layer height: 0.16 mm Infill: 15% Nozzle: 0.4mm supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal   Assembly – Recommended Method on multipart models Dry fit: Assemble all parts without glue to check alignment and fit. Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together. Optional fix: Use glue for permanent assembly.