LIFE-SIZE DRAGON BALL LOGO AMS DISPLAY EDITION

🐉 LIFE-SIZE DRAGON BALL LOGO – GIANT AMS DISPLAY EDITION Bring the Dragon Ball universe to life with this massive, fully printable Life-Size Dragon Ball Logo, designed specifically for AMS multi-color printing on the Bambu Lab H2C. This isn't a simple flat logo — the design features a large dimensional Dragon Ball wordmark, a detailed coiling Shenron-style dragon, layered lettering, claws, scales, whiskers, horns, and a raised 1-Star Dragon Ball centerpiece. The entire logo has been engineered as a modular 8-part print, allowing the huge display to be produced on the H2C while maintaining the crisp multi-color separation that makes the finished piece pop.   Boost MeIts Free :D 🐉 SCALE & DIMENSIONS 1150mm wide  Life-Size Display Designed as a large-scale Dragon Ball wall/display logo with a highly dimensional construction. The model can be scaled to suit different wall sizes while retaining the same modular architecture. Modular Parts 8 Parts Total The logo has been divided into eight large sections, making it practical to print on the Bambu Lab H2C rather than requiring one enormous print. 🖨️ H2C AMS OPTIMIZED This design was created specifically with AMS multi-color printing in mind. The included layout demonstrates the complete logo distributed across 8 H2C print plates, allowing the individual sections to be printed and assembled into one enormous finished display. Designed For: 🔥 Bambu Lab H2C 🎨 AMS Multi-Color 🧩 8 Modular Sections 📐 Large-format wall display 🎨 AMS MULTI-COLOR DESIGN This is where the model really comes alive. The finished logo uses a strong Dragon Ball-inspired palette: 🟧 Orange Main DRAGON BALL lettering 🟢 Green Shenron's body and scales 🔵 Blue Dragon mane / spikes and accent details 🟡 Yellow Dragon underbelly and highlights ⚫ Black Large dimensional background and outline 🔴 Red Dragon Ball star The layered construction gives the lettering and dragon a much more impressive appearance than a simple flat HueForge-style sign. 🐲 SHENRON-INSPIRED DRAGON DETAIL The dragon wrapping around the logo is loaded with detail. Body 🐉 Individual scales 🐉 Layered body sections 🐉 Sculpted underbelly 🐉 Flowing mane 🐉 Organic curves 🐉 Long winding body Head The dragon head sits prominently in the center of the logo with: Sculpted facial features Large expressive eyes Defined muzzle Horns Long whiskers Detailed teeth Raised facial features Claws Multiple claws wrap around the lettering, adding depth and making the dragon feel like it is physically gripping the logo. ⭐ 1-STAR DRAGON BALL CENTERPIECE At the heart of the design sits the iconic Dragon Ball centerpiece. The ball is constructed as a raised dimensional element with: ⭐ Bright orange body ⭐ Raised red star ⭐ Strong black separation This makes the Dragon Ball immediately stand out from the surrounding green dragon and orange lettering. 🔠 DIMENSIONAL DRAGON BALL LETTERING The DRAGON BALL text has been designed as large raised lettering rather than simply being printed onto a flat background. The orange letters provide an enormous amount of contrast against the black backing and green dragon. This also creates strong shadows between the different layers, giving the finished logo a collector-sign / premium wall-art appearance. 🧩 MODULAR BREAKDOWN The complete logo is separated into: 01 → Left Dragon / DRAGON section 02 → Upper-center Dragon section 03 → Right Dragon section 04 → Left-middle lettering section 05 → Center lettering / Dragon Ball section 06 → Right-middle lettering section 07 → Lower-left section 08 → Lower-right section Once assembled, the eight sections create one continuous giant Dragon Ball display. 🔩 ASSEMBLY The modular sections are designed to be joined together after printing. Recommended Assembly Process 1️⃣ Print all 8 sections Keep each section labelled during printing. 2️⃣ Remove AMS purge/support material Clean the edges carefully so the joins remain flush. 3️⃣ Test fit Dry-fit all eight sections before applying adhesive. 4️⃣ Align the sections Make sure the Dragon's body and lettering flow smoothly across each seam. 5️⃣ Bond Use CA glue for smaller connections or a suitable two-part epoxy for larger structural joints. 6️⃣ Final installation Mount the completed logo to your wall/display surface. 🖨️ PRINTING RECOMMENDATIONS Layer Height 0.16–0.20 mm For maximum detail on the dragon's scales: 0.12–0.16 mm Walls 3–4 Walls Infill 8–15% Gyroid Because this is primarily a decorative wall/display piece, excessive infill isn't necessary. Top / Bottom 5–7 Layers 🌳 SUPPORTS The majority of the logo should be designed to print with minimal support requirements. Where support is necessary, use: ✔ Tree supports ✔ Support blockers ✔ Organic supports around isolated dragon details Pay particular attention to: Dragon claws Whiskers Horns Raised facial details Small protruding elements 🎨 PAINTING / FINISHING Although this model is AMS-ready, you can take the finish even further. Black Use a satin or gloss black for the backing. Orange Use a vivid Dragon Ball orange for the lettering. Green Use bright green for the dragon body. Blue Use a strong blue for the dragon's mane and spikes. Yellow Use golden yellow for the belly scales. Red Use bright red for the Dragon Ball star. A clear gloss coat on the dragon and lettering can give the completed logo a premium collectible-sign appearance. 💡 DISPLAY IDEAS This would make an insane addition to: 🔥 Dragon Ball gaming rooms 🔥 3D-printing rooms 🔥 Anime collections 🔥 The Majin Lab display wall 🔥 Streaming setups 🔥 Bedroom walls 🔥 Man caves 🔥 Collector rooms 🔥 Studio backdrops The large dimensional construction also makes it ideal as a YouTube / TikTok / streaming background piece. ⭐ COLLECTOR FEATURES ✔ Life-size Dragon Ball logo ✔ 8 modular parts ✔ Designed for Bambu Lab H2C ✔ AMS multi-color ready ✔ 8 individual H2C print plates ✔ Large dimensional lettering ✔ Detailed Shenron-inspired dragon ✔ Individual dragon scales ✔ Detailed claws ✔ Sculpted horns and whiskers ✔ Raised Dragon Ball centerpiece ✔ Raised red 1-star detail ✔ Layered dimensional construction ✔ Wall-display friendly ✔ Easy modular assembly ✔ Highly customizable color palette 🐉 FINAL THOUGHTS This Life-Size Dragon Ball Logo is built to be a statement piece. With 8 massive modular sections, full H2C AMS compatibility, and a vibrant multi-color design, the finished logo transforms the classic Dragon Ball branding into a huge three-dimensional display. The combination of the orange dimensional lettering, green and blue dragon, golden scales, black backing, and the glowing-looking 1-Star Dragon Ball centerpiece makes this one of those prints that immediately grabs attention from across the room. 8 plates. One massive Dragon Ball display. 🐉🔥 🟢 H2C + AMS READY 🎨 MULTI-COLOR 🧩 8 PART MODULAR DESIGN 🐉 GIANT SHENRON-STYLE DETAIL ⭐ 1-STAR DRAGON BALL CENTERPIECE 🔥 THE MAJIN LAB EDITION   Boost MeIts Free :D