Olive Arc V2 - Parametric Elevated Pet Feeder

Boost MeWith just a couple of free clicks you would make my day! :)Overview Clean, modern elevated feeder designed for comfort and stability V2 of https://makerworld.com/en/models/1869920-olive-arc-elevated-pet-feeder#profileId-2001361  Parametric - Bowl diameter and feeder heightHeight is twice as tall as entered: Entered value for height is for each part that will combine/stack for the final product. Proven functional design — shown in real-world use with full bowl load Ideal for pets and bowls of all sizes Lightweight yet rigid structure for everyday use Features Perfect Fit: The print will be as good as your bowl measurement! Support-Free Print: Designed for efficient FDM printing with no supports required Strong Geometry: Curved structural ribs provide excellent strength without excess material Non-Slip Ready: Integrated 10 mm rubber foot insets for stability on smooth surfaces Pet-Friendly Height: Promotes improved feeding posture and comfort Clean Aesthetic: Minimalist design with subtle paw accents User Verified: Successfully printed and tested with real pets (cats and dogs) Description The Olive Arc Elevated Feeder blends form and function into a piece that feels more like modern decor than a typical pet accessory. Smooth, flowing curves wrap around the structure, creating a lightweight yet durable frame that looks sculpted rather than printed.   Designed with real pets in mind this stand delivers both comfort and reliability. The elevated height reduces strain during feeding, while the open architecture keeps the design visually light and easy to clean. The subtle paw print details add personality without overwhelming the minimalist look. Paired with a stainless steel bowl, the result is a clean, premium feeding setup that fits seamlessly into any home.   Every aspect of this model is intentional: from the perfect bowl tolerance to the support-free geometry, making it as efficient to print as it is satisfying to use. Assembly Guide Print the feeder stand using your measurement settings and put together (tight tolerances, glue optional) Insert 10 mm rubber feet into the bottom insets (press-fit or light glue if needed) Place your measured bowl into the top opening Set on a flat surface and ensure stability Ready for use Bill of Materials (BOM) 10 mm rubber feet (optional but recommended) https://amzn.to/4vN2G6g  Stainless steel bowl.  Technical Print Settings Recommended Profile (Tested): Layer Height: 0.2 mm Wall Loops: 3 walls Infill: 15% (Cross Hatch) Supports: None required Adhesion: Optional brim depending on surface Print Stats: Material (depends on your settings): ~141 g filament Time (depends on your settings): ~4 hours All filaments work great