Dummy 13 Exoskeleton Suit

This is an upper-body exoskeleton suit designed for Dummy 13. It does not restrict or hinder the movement of the upper body, regardless of how you pose or move it.   Assembly is very simple. Please follow the instructions below.       Remove all brims and check the parts. PLA can be used for printing. Place the center piece in the middle and install the two hinges. Then connect the two long arms to each side, with the printed surface facing upward. Make sure they are oriented in the same direction as the pointed end of the center piece.     This is the most important part: Make sure all four long arms are facing the same direction. If you're having trouble understanding the instructions, simply refer to the photos—they will make it easy to follow.   Attach the assembly to the back, then install the connecting parts on the wrists. Once they are mounted to Dummy 13’s wrists, everything should fit perfectly. When attaching it to the back, it may not slide in easily or may not go all the way in. Press firmly to secure it in place!!!!   ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ   This is an extended version that also provides support down to the waist. There are currently no plans to release it, but if there is enough demand, I will work on resolving the issues and release it.