Schulterrüstung - Legendäre Zwerge

Pauldrons of the Deep Forge – Legendary Dwarven Shoulder Armor   “Forged in the heart of the mountain, where the strike of the hammer echoes through the deep halls…”   Equip yourself with the unmatched craftsmanship of the ancient dwarves! These 3D-printable pauldrons are artifacts straight out of the legendary Deep Forge hidden high in the mountains. Renowned for their impenetrable defenses and ornate metalwork, the dwarven smiths designed armor that was as beautiful as it was indestructible. Whether you are scaling this up for an epic fantasy cosplay, printing it as a display piece for your collection, or sizing it down for a tabletop miniature, this armor brings deep-mountain lore right to your build plate. ✨ Design Highlights Deep Forge Runework: Intricate dwarven runes and geometric engravings adorn the plates, perfect for catching washes, dry-brushing, and weathering techniques. Battle-Ready Textures: Designed with the look of heavy, hammered mountain-steel. It looks rugged, ancient, and forged to withstand the test of time. Cosplay & Display Ready: The geometry is optimized to look imposing and heavy, while remaining manageable to print. Easy Scaling: Print at 100% for an impressive desk artifact, scale it up to fit your shoulders for a LARP/cosplay build, or shrink it down to equip your tabletop statues. 🛠️ Suggested Print Settings To capture the legendary mastery of the dwarf smiths, here are the recommended slicer settings: Layer Height: 0.2 mm (for high-detail display pieces) Infill: 10% - 15% Gyroid. (If printing for wearable cosplay, you want to keep it lightweight!). Walls/Perimeters: 3 to 4 (gives the armor structural strength without adding too much weight). Supports: Tree/Organic supports are recommended for the underside curves of the shoulder bowl to ensure a clean surface. Material Recommendations: PLA, PETG, or ABS/ASA. Pro-Tip: Print in a Silk Gunmetal, Silver, or Bronze PLA. If you plan to paint it, a matte gray PLA serves as an excellent base for priming and adding metallic acrylics! Calling all Forgemasters! Did you print these for a full cosplay, or as a legendary display piece? Post your makes and painted versions in the comments below. Let the fires of the Deep Forge burn on!   !!!Size was measured by a average human adult!!!