Jagdtiger Tank Destroyer with Movable Barrel 1/72

  Special thanks to NEXA MODELS https://makerworld.com/en/@user_842063421 for adjusting the scale of my Jagdtiger Tank Destroyer model from 1/35 to 1/72. With his generous approval, I am able to release this model on my account for community sharing.   This is our second time working together. He is a great creator, and working with him is always inspiring, easy, and very smooth.   ================================   📋 Recommended Print Settings (For Best Results)  Filament: PLA. Different materials have different shrink rates, so using other filaments might cause fitting issues or dimensional errors during assembly.  Slicer: Bambu Studio. I recommend using my default profile — I’ve tuned it specifically for this model.  Ambient Temperature: If you’re using an open-frame printer like the A1 or A1 Mini, keep your room above 20°C (68°F) to prevent warping.  Print Bed Preparation: Wash with soap and water, then dry thoroughly to ensure good adhesion. For small parts, apply a glue stick for better bed adhesion.  🔧 Assembly Diagram Notes  Blue Lines: Require super glue for assembly. I use Gorilla Super Glue.  Yellow Lines: These are moving parts. Do not apply glue here.   The tank's side skirts use hand-drawn supports. Please use a hobby knife to cut them off. Don't worry, the sprue marks are on the inside of the skirts, so they won't be visible once the model is assembled.