Ooshie Display Stand - Raked/Stadium style design.

For displaying the ~40 Ooshies available in some Australian shops currently. No glue needed! This stand leans back about 8 degrees which helps to see all the figurines better, especially those in the back rows.   This model comes in 2 versions, with nameplates and without nameplates.   Once you choose one of those print profiles, you can choose whether you'd like the standard 40 peg version, or the extended 42 peg version. Print out the first 2 plates, then choose between printing the standard or extended version plates. Licence This is for non-commercial use only. If you are interested in selling these, please visit: https://ko-fi.com/s/5506702e82 Boost MeIf you enjoyed this print feel free to give me a boost. It helps motivate me to create more things! Consider dropping a small tip to https://ko-fi.com/theyamez as well =)Assembly You'll need to print the two sides, 4 back pieces and 4 front pieces. The front pieces go in first, and simply go into the slots on the front side. The rear pieces go in last and have little wings. They must be slid in from the back. If you have chosen the version with nameplates, they simply slot into the nameplate slots in the front tiers.