FloraGlow Botanical Lamp

Illuminate your workspace or bedside with the FloraGlow Botanical Lamp. Inspired by organic botanical geometry and Art Nouveau aesthetics, this fully 3D-printable lamp features a sweeping, vine-like stem and a beautifully layered, downward-facing floral shade designed to perfectly fit a standard E14 threaded socket. Whether you are using it as a cozy reading light, an ambient nightlight, or a statement piece for your living room, the intricate leaf detailing on the base and the soft, diffused glow of the petals make this a stunning addition to any room. The design includes a hollowed stem for seamless, hidden cable routing, ensuring a clean and professional final look. Key Features: Organic, Sculptural Design: Features deep, textured leaf veins on the base and a dynamic, curving vine stem. E14 Socket Integration: Engineered to seamlessly mount a standard E14 threaded lamp holder, making electrical assembly straightforward and secure. Integrated Cable Management: The stem is designed with an internal channel to easily route your standard lamp cord from the base up to the socket. Multi-Part Assembly: Designed to be printed in multiple pieces to optimize orientation, minimize supports, and allow for dual-color aesthetics (e.g., green stem/base and white/translucent petals). Soft Light Diffusion: The overlapping petal design of the lampshade acts as a natural diffuser, creating a warm, ambient glow. Hardware Required: 1x Standard E14 threaded lamp holder (socket) 1x E14 LED bulb (Low wattage) 1x Lamp cord with plug and inline switch Recommended Print Settings: Lampshade (Petals):Filament: Translucent PLA, PETG, or White Silk PLA (for maximum light diffusion). Infill: 0% (or 100% concentric if printing solid thin walls). Walls: 2-3 walls (depending on how much light you want to let through). Supports: Minimal to none, depending on your printer's overhang capabilities. Base & Stem (Vine/Leaves):Filament: Matte Green PLA, Dark Green PETG, or Wood-fill for an earthy look. Infill: 15-20% Gyroid (increase bottom layers or add weights inside the base for maximum stability). Walls: 3-4 walls for structural strength. Supports: Tree supports recommended for the curving stem and overhanging leaves. Assembly Instructions: Print the base, stem, and lampshade separately. Thread your lamp cord through the internal channel, starting from the bottom of the base and pushing it up through the curving stem. Wire your E14 threaded holder and secure it securely to the mounting point at the top of the stem. Screw in a low-wattage E14 LED bulb. Thread the floral lampshade over the E14 holder and secure it in place (use the socket's threaded collar ring if your holder includes one). Safety Note: Only use low-wattage LED bulbs (like a 3W or 5W E14 LED) with 3D-printed lamps to ensure the plastic does not melt or deform from heat.