Boardgame top inside Shelf Kallax Billy allprinter

Update august 6th: because of the demand, more print models will be added today for people with smaller printbeds than H series but larger than bambu A1 mini.   Max out your board game storage and eliminate dead space! 🚀    This 3D-printed Top Shelf or Inside Organizer is specially designed to neatly stack and display smaller board games or card games right on top or even inside of your IKEA Kallax, Billy or other bookcases. There is an option to combine two prints to fit inside a Kallax cube. (model 3) I also included a connector, so every model can be connected. (no screws, no glue)   Don't let the compact size fool you. Thanks to optimized print settings, this rack is incredibly robust and handles heavy weight with ease.  There are multiple models available even for the A1 mini!   It easily supports heavier small-box games with premium wooden or 3D-printed inserts.  The clever built-in rear stopper lip ensures your games never slide out of the back! ✨ Perfectly fits games like: Beacon Patrol (even with a heavy insert!) Lata The Lost Expedition Fleet: The Dice Game French Quarter Under Falling Skies Dimensions & Specifications 📐 for model 1 (biggest) for large printer Width: 30.5 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Total Depth: 25.5 cm (including the rear game-stop lip) Max Game Box Depth: 24.5 cm Compatibility: Perfect for IKEA Kallax and Billy. Please check dimensions for inserting in Billy cases, I have not tried this. Printer: H2S, A2L Dimensions & Specifications 📐 for model 2: 20 cm wide fits more printers Width: 20 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Total Depth: 25.5 cm (including the rear game-stop lip) Max Game Box Depth: 24.5 cm Clip is available to attach several prints (optional) Printers: H2S, A1, A2L, H2C, X2D, H2D Pro, H2D, P2S Dimensions & Specifications 📐 for model 3: 16,6 cm wide - combine 2 for inserting IN A KALLAX CUBE  fits more printers Width: 16,6 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Total Depth: 25.5 cm (including the rear game-stop lip) Max Game Box Depth: 24.5 cm Clip is available to attach several prints (optional) Printers: H2S, P2S, H2D Pro, X2D, H2D, A2L, A1, H2C Dimensions & Specifications 📐 for model 4: Mini A1 compatible: 18 cm wide and 18 cm deep (max size) Width: 18 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Depth 18 cm Max Game Box Depth: 17 cm Optional clip connector is available to connect several prints. Printers: H2S, P2S, H2D, X1 Carbon, H2C, X2D, H2D Pro, X1E, X1, P1P, P1S, A1, A2L, A1 mini Dimensions & Specifications 📐 for model 5: CONNECTOR PIECE optional Clip connector to attach several prints together so they won't slide Printers: H2S, X1, P2S, A1 mini, H2D Pro, X1E, A1, H2C, P1S, A2L, P1P, X2D, H2D, X1 Carbon   Dimensions & Specifications 📐 for model 6: Bambu A1 mini print, print two and combine to FIT INTO ONE KALLAX CUBE Width 16,6 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Depth : 18 cm (max possible) Max Game Box Depth: 17 cm optional: print the connector to attach them to each other Printers: H2S, X1E, H2D Pro, X1, P2S, X1 Carbon, X2D, P1P, H2D, A1 mini, P1S, A2L, A1, H2C Dimensions & Specifications 📐 for model 7: 20 cm wide, 25 cm deep: fits a lot of printers Width 20 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Depth : 25 cm Max Game Box Depth: 24 cm optional: print the connector to attach them to each other Printers: H2S, X2D, P2S, H2D Pro, X1, P1P, H2D, X1 Carbon, X1E, A1, A2L, P1S, H2C Dimensions & Specifications 📐 for model 8: 16,6 cm wide, 25 cm deep: fits a lot of printers PRINT TWO TO FIT IN KALLAX CUBE Width 16,6 cm Height model: 16.3 cm total, height space below 14 cm Height suggested for boardgames: around 13,8 cm max Depth : 25 cm Max Game Box Depth: 24 cm optional: print the connector to attach them to each other Printers: H2S, X2D, P2S, H2D Pro, X1, P1P, H2D, X1 Carbon, X1E, A1, A2L, P1S, H2C Print Settings ⚙️ Material: PLA is fine due to the settings of my model if you press print. Infill: 15% Supports: None required / Print orientation ready If there is demand I will look into designing a stacker with the complete width of a Kallax cube to print on the H2S. If anyone is looking for this, please comment. If you find this helpful please rate, like, post a pic. I love some feedback and it helps me get more exposure.  Thank you! Boost MeI spent a lot of time designing, printing and testing this. Please like, rate, boost, take a pic, comment…I appreciate a little gesture to help me get this model up in exposure. Thank you for your kindness.