Adjustable Phone Stand

Hello everybody!   I've been designing my own portable phone stands because the few I tested tended to be quite cumbersome, admittedly there are loads out there, but I like designing things so I wanted to see what contribution I could make.    My problem is that I'm tall so a lot of the nice portable stands are too vertical for my liking, and the ones that do adjust are usually not to my taste. I don't blame them, I find it hard not be utilitarian with certain things, thankfully Makerworld is a great inspiration for how functional models can still look nice, that was my aim with this. Features A foldable design: making it highly portable A locking function: to allow it to support heavier item like tablets Customisable accents to match it to you colour scheme Consistent surfaces - because the side parts are printed face down both sides of the stand have the same texture when assembled.     Printability Cleaning your print bed and tuning your filament tolerances will yield the smoothest results. Some of the parts have a small contact area so a clean plate is essential. I reccomend using the Cool Plate SuperTack or the Smooth PEI build plate as they will leave a nice texture and support the parts much better. Layer Height: Use 0.20mm for the main body and 0.10mm for the threaded pin to ensure the threads print with enough detail.   Walls & Infill: I use 4 wall loops to give it more waight.   Materials: I recommend Bambu PLA-CF or PLA Matte for a clean, premium finish. Ensure you are using a well-tuned filament profile and dry filament to prevent the supports from fusing to the model.