Samurai Girl Hueforge

Boost MeUn petit clic sur “Boost” et tu m’aides énormément — sans rien dépenser ! Merci pour le soutien ❤️ A simple click on “Boost”, helps me a lot — and it costs you nothing! Thanks for the support ❤️MembershipAvec le membership, tu peux vendre toutes mes impressions en toute liberté ! Un vrai coup de pouce pour mon travail ❤️ Merci ! With a membership, you're free to sell all my prints! It really supports my work ❤️ Thank you!Project: Samurai Girl.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 235x235mm in size You may print at higher layer heights below the Base Thickness of 0.48mm     PLA BambuLab Basic Black  Transmission Distance: 0.6     PLA BambuLab Basic Blue Gray  Transmission Distance: 3     PLA BambuLab Basic Red  Transmission Distance: 4     PLA BambuLab Basic Jade White  Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions:     Start with Black     At layer #6 (0.56mm) swap to Blue Gray     At layer #9 (0.8mm) swap to Black     At layer #10 (0.88mm) swap to Red     At layer #15 (1.28mm) swap to Black     At layer #21 (1.76mm) swap to Jade White for the rest.   Pour le cadre en 235x235mm le lien ci-dessous / For the 235x235mm frame, click on the link below: https://makerworld.com/fr/models/2458364-frame-235x235mm#profileId-2699216   Pour le cadre en 200x200mm le lien ci-dessous / For the 200x200mm frame, click on the link below: https://makerworld.com/fr/models/2458286-frame-200x200mm#profileId-2699108