Spider-Man 361 (PART ONE) Comic Cover

If you enjoy my models, please consider leaving a like, following my profile and boosting my prints. Your support means a lot and keeps me inspired to create more awesome designs. Thank you!   Follow me on Instagram @Indepth_creations and keep up to date with all my upcoming prints I'll be uploading to my maker world.    Project: ASM-PART1.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 131.78x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.16mm and the Actual Thickness is 2.08mm     #000000 PLA 3DC Black  Transmission Distance: 0.6     #eb3b41 PLA Jayo  Matte Red  Transmission Distance: 3.2     #229bd5 PLA 3DC Blue  Transmission Distance: 2.4     #898d8d PLA ELEGOO GREY Gray  Transmission Distance: 3     #ffffff PLA 3DC White  Transmission Distance: 4     #ffd500 PLA Sunlu Yellow  Transmission Distance: 3.5     #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4 This print uses 7 unique filaments Swap Instructions:     Start with Black     At layer #9 (0.8mm) swap to Red     At layer #13 (1.12mm) swap to Black     At layer #14 (1.2mm) swap to Blue     At layer #17 (1.44mm) swap to Gray     At layer #19 (1.6mm) swap to White     At layer #21 (1.76mm) swap to Yellow     At layer #23 (1.92mm) swap to Turquoise     At layer #24 (2mm) swap to White for the rest.    Note: Results may vary if different filament colours or brands are used. For the best match, use the recommended filament colours.   Don't forget to share your pictures of the prints. I would love to see how they turn out.