Tactical Spice Shaker 2.0

Tactical Spice Shaker 2.0 🌶️ The Tactical Spice Shaker is back! Version 2.0 takes the rugged, compact design from the original and updates it based directly on your feedback from the comments. The biggest upgrade? Refilling is now effortless. Everything that worked great in v1 stays intact, but the entire loading process has been completely redesigned.  What’s New in 2.0 Hassle-Free Refilling: Simply slide out the inner core and use the included custom funnel tool to fill each chamber in seconds without spilling. Spice Level Windows: Pro Tip: Print the inner insert using translucent/clear filament (PLA or PETG)! The cutouts on the outer body will let you see exactly how much spice is left and quickly identify what's inside. Key Features 3 Isolated Compartments: Keep salt, pepper, and your favorite spice completely separate in one pocket-sized unit. Ultralight & Compact: Weighs only 50g, making it perfect for ounces-counting backpackers and minimalist hikers. Pocket-Proof Screw Lid:  Threads lock down tightly, ensuring fine powders won't leak out or mix together in your bag. Side Name Plate Slots: Includes the signature slide-in slots for custom spice labels. (💡 Tip: Just like the big brother model, I highly recommend adding a drop of superglue or hot glue behind the plates to lock them permanently in place for the trail!) Integrated Clip Loop: A reinforced side loop lets you clip it directly to your harness, backpack strap, or camp kitchen setup. Print Recommendations Inner Insert: Translucent / Transparent PETG or PLA (for visible spice levels) Brim: If you've got adhesion issues with your printer I would suggest adding an inner brim. Outer Body & Cap: Standard PLA, PLA Tough, or PETG Supports: None Layer Height: 0.16mm – 0.2mm Food Safety Note: As with all 3D-printed kitchenware use a food-safe clear coat on the interior if you plan on long-term storage of fine powders. SPICES NAME PLATES: If other type of spice name plate is needed, leave a comment and I will make sure to add it!   Wash all parts after printing to get rid of strings and other particles from the printing process. Then let dry for some time. P.S. For cord end I've printed this file: https://makerworld.com/en/models/2198297-cord-end#profileId-2387892      Check out the CampWash - Hand Washing Station (Table top mount and Table leg mount; 6 compartment Outdoor Spice Shaker! (click on the picture)   Boost MeIf you liked this model, a Boost 🚀 would mean a lot. Thanks for supporting my work!