Ooshie Vertical Display Stand

For displaying the ~40 Ooshies available in some Australian shops currently.   Print the first 2 plates, and choose between the extra 2 slots or the standard plate. If you want to customize, the front platforms can be swapped from a 5 peg to an 8 peg, the rear one can be swapped from a 5 peg to a 4 peg spaced to be seen behind the front row. Assembly You'll need to print the two sides, 4 back pieces and 4 front pieces. The front pieces go in first, and simply go into the slots on the front side. The rear pieces go in last and have little wings. They must be slid in from the back. It's quite tight so may need to be tapped into place.