Easy Plug Puller for EU Type E/F

Easy Plug Puller for EU Type E/F A simple two-part lever designed to make tight electrical plugs easier to remove. Instead of pulling hard on the cable or repeatedly rocking the plug, press the large rounded lever to help release the plug with less effort. The mechanism can remain permanently fitted to the plug and is particularly useful for low wall outlets, tight sockets and plugs that are difficult to grip. For low outlets, the large lever can also be pressed with a socked foot in a dry environment. This accessory may be particularly helpful for older adults and for people with arthritis, reduced grip strength, limited hand mobility or other difficulties handling tight electrical plugs. By using a large lever, it reduces the need for a strong pinch grip and can make everyday unplugging more comfortable. Main features Makes tight plugs easier to remove Helps avoid pulling directly on the electrical cable Helps reduce the pulling effort applied to the wall outlet May help users with reduced grip strength or limited hand dexterity Large lever designed for easier hand or foot operation Remains fitted to the plug after use Works with straight and angled plug bodies Two fully 3D-printed parts Clip-together assembly No glue, screws or additional hardware Printable in PETG or PLA Only approximately 12 g of filament Approximately 32 minutes of model printing time Compatibility Tested with European: Type E plugs Type F plugs CEE 7/7 plugs Straight plug bodies Angled plug bodies It has been tested with plugs used on extension leads, power strips, kettles and other household appliances. Plug dimensions and shapes may vary between manufacturers. Compare your plug with the photographs before printing. The accessory must not prevent the plug from being inserted completely into the socket. Printing information Parts: 2 Material: PETG or PLA Model printing time: approximately 32 minutes Estimated total time: approximately 41 minutes, including printer preparation Model filament: approximately 3.88 m / 11.96 g Total filament consumption: approximately 4.01 m / 12.35 g Supports: a very small amount of standard supports Tree supports: not required Support removal: easy Glue: not required Additional hardware: not required The supplied Bambu Studio 3MF project already contains the recommended orientation and the necessary supports. Preparation time may vary depending on automatic bed levelling, calibration and the options selected by the user. Assembly Remove the small support areas. Position the circular part between the two arms of the lever. Align the two side pivots. Press the parts together until both sides are correctly engaged. Fit the assembled mechanism around a compatible plug body. Check that the plug can still be inserted completely. No glue or tools are required. How to use Insert the plug completely into the outlet. Press the large rounded lever toward the wall. The lever pushes against the outlet plate and helps release the plug. Pull the plug body clear without pulling on the cable. Safety information This is a convenience accessory and not a certified electrical safety device. Do not use it if it prevents the plug from being inserted completely. Do not use it with damaged, cracked, loose, wet, deformed or unusually hot plugs and outlets. Never touch the metal pins while operating the mechanism. Stop using the printed part if it becomes cracked, loose or deformed. Always unplug electrical equipment by acting on the plug body, never by pulling the cable. Français Retire-Prise Facile est un accessoire en deux pièces conçu pour faciliter le retrait des fiches électriques difficiles à débrancher. Une pression sur le grand levier aide à extraire la fiche avec moins d’effort, sans tirer directement sur le câble. Le mécanisme peut rester installé en permanence sur la fiche. Ce système peut être particulièrement utile aux personnes âgées, aux personnes atteintes d’arthrose, ayant une force de préhension réduite, une mobilité limitée des mains ou d’autres difficultés de manipulation. Son grand levier diminue la nécessité de pincer fortement la fiche et peut rendre le débranchement quotidien plus confortable. Pour les prises situées près du sol, le levier peut également être actionné avec le bout du pied en chaussette, dans un environnement sec et sans toucher les parties métalliques de la fiche. Le modèle a été testé avec des fiches européennes de Type E, Type F et CEE 7/7, droites ou coudées. Il peut notamment être utilisé avec certaines fiches de multiprises, rallonges, bouilloires et appareils électroménagers. Il s’imprime en PLA ou en PETG et s’assemble par clipsage, sans colle, vis ou accessoire supplémentaire. Ce modèle est une aide pratique du quotidien et non un dispositif médical ou un dispositif de sécurité électrique certifié. Ne l’utilisez jamais s’il empêche l’insertion complète de la fiche, s’il est fissuré ou déformé, ou avec une prise endommagée, desserrée, humide ou anormalement chaude.     If this model makes unplugging easier, please share a photo of your print and consider giving it a Boost. Boost MeIf you like my work, give me a boost :) Thanks!