Broom Holder - Tool Wall Mount - 5 Sizes

Boost Me❤️ One click. Real support. Thank you. ❤️ ⚙️ Helps build the next Component tool.  Broom Holder is a one-piece wall mount for brooms, mops, rakes, shovels and other round-handled tools. Measure the handle, choose the matching size and print the holder you need. The XS-XL set covers a tested handle range from 10 to 35 mm / 0.39 to 1.38 in.   ✅ Quick Size Choice   Measure the handle where the holder will grip it. Then choose the first listed best-grip diameter equal to or larger than your measurement. 15 mm handle → print XS. 17 mm handle → print S. 22 mm handle → print M. 27 mm handle → print L. 32 mm handle → print XL. If you are not sure which size feels best, print the All 5 Sizes XS-XL plate first and compare the fit before mounting.   📏 Best-Grip Diameter SizeBest-grip diameterXSØ15 mm / 0.59 inSØ20 mm / 0.79 inMØ25 mm / 0.98 inLØ30 mm / 1.18 inXLØ35 mm / 1.38 inBest-grip diameter is the tested target that gave the most stable hold for each size. A slightly smaller handle can still clip in but may sit less firmly. A larger handle fits more tightly and puts more flex into the holder.   ⚙️ Key Features One-piece flexible holder with no printed hinge, pin or insert. Five marked sizes for quick selection after measuring the handle. Front-access screw hole so mounting remains easy. Separate PLA and PETG profiles for fast material choice. All-sizes plate for fit comparison or mixed tool setups. STL files included for users who want to slice manually.   📦 Included 5 holder sizes: XS, S, M, L and XL. Individual PLA and PETG 3MF print profiles for each size. PLA and PETG all-sizes XS-XL profiles. STL files for all five holders. STL file for the XS-XL all-sizes plate.   🧰 Best For Broom and mop handles. Rakes, shovels and other round-handled garden tools. Round-handled workshop and cleaning tools. Garage, workshop, shed and cleaning-closet organization.   🔩 Mounting The holder mounts with one screw through the front-access hole. Choose a screw and wall anchor appropriate for the mounting surface and the tool being stored. Mounting hardware is not included.   🖨️ Print Notes Prepared for Bambu Lab A1 mini with a 0.4 mm nozzle. 0.20 mm layer height. 4 wall loops. 15% grid infill. Supports disabled in the supplied profiles. 5 mm automatic brim enabled. PLA profiles use Bambu PLA Basic. PETG profiles use Bambu PETG HF.   ⚠️ Important Notes The tested selection range is 10-35 mm / 0.39-1.38 in. Fit can vary slightly with filament, printer calibration and surface texture. No load rating, outdoor rating or heat resistance rating is claimed. For heavier tools or demanding setups, print one holder first and test it with your own wall surface and mounting hardware.   Boost Me❤️ One click. Real support. Thank you. ❤️ ⚙️ Helps build the next Component tool.  🔗 More from Component Bag Hook Clip - Keychain Gear Clip Cable Organizer Clip - Desk Cable Holder Plant Watering System - Self Watering Reservoir