Tumbler Rack Stand - Stanley, Yeti, Hydro Flask

Cabinet and Pantry Organizer for various tumblers and drink bottles. Prints in place to avoid assembly problems.   Features included multiple sizes, clip connectors, clip on straw holders (straight and angled). Filament-saving design has hexagonal cutouts. Adds a little more time at the convenient of saving filament. If needed, you can reduce to 10% infill.   Available in two sizes : 120mm spacer between tiers (the 3 wide, and 3 tier versions must be printed on an H2 series printers)40oz Stanley must have handles fit into the middle section, so max of (2) 40oz Stanley per tier on 3 wide and (1) 40oz Stanley per Tier on 2 Wide.  3 Wide profiles are set for H2D on Left Nozzle, should be find for all H2 Series printers Profiles Centered for 2 Wide and 1 Wide 2 Wide - 2 Tier and 1 Wide - 2 Tier are printable on A1/A2, P1/P2, and X1/X2 printers 110mm spacer between tiers (printable on A1/A2, P1/P2, and X1/X2 series printers)This is mainly for tumblers and water bottles without handles Will fit a 30oz Stanly with the handle in the middle section groove, so 1 per tier I may make an extended / longer version with more room so 30oz Stanleys can have their handles in the outward grooves Profiles Currently Available: 120mm - 3 Wide - 3 Tiers 120mm - 3 Wide - 2 Tiers 120mm - 2 Wide - 3 Tiers 120mm - 2 Wide - 2 Tiers 120mm - 1 Wide - 3 Tiers 120mm - 1 Wide - 2 Tiers 110mm - 2 Wide - 3 Tiers 110mm - 2 Wide - 2 Tiers 110mm - 1 Wide - 3 Tiers 110mm - 1 Wide - 2 Tiers