Trojan Horse Puzzle

Boost MePlease Boost if you like my model!Where is the Trojan soldier hiding inside this wooden horse?? Can you find him?  This is a moderate level difficulty puzzle with 6 step puzzle that is fun for all ages! If you have any questions pertaining to assembly or issues printing then please let me know in the comments! Looking forward to seeing everyone's makes!  MAGNET ASSEMBLY: This model uses eight 4x2mm magnets and glue. Take the following two parts seen in the image and glue together. Ensure proper orientation of the wedge.    Glue first magnet into pocket on this piece in the pocket.    3. Glue opposite polarity onto ladder (shown in red in image below) so that it is attracted to the previous magnet.    4. Gather the following 3 pieces shown in the image below for the head assembly.    5. Glue a magnet inside the head on the hole highlighted in green. Next glue a magnet with opposite polarity (such that it attracts) onto the back side of the drawer piece.              6. Glue magnets of attracting polarity in the key and the inside of the head drawer. The head drawer is tricky to put the magnet in. It is easiest to put glue in the hole and then, using a chain of magnets, push them into the hole and wait for 30 seconds. Then carefully remove the remainder so only the magnet in the pocket remains fixed.            7. Glue the following magnets onto the tail drawer and tail drawer cover such that they attract. ASSEMBLING THE HORSE: Video for how it is put together after all the magnets are installed is available.    1, Put ladder in from the bottom then horses main from the top.  2. Apply a small amount of glue to the top of the neck. Make sure that it does not ooze outward. A few small drops around the perimeter will be enough to hold the head in place. Then put the head onto the horse.  3. Put a few drops of glue onto the feet cut outs on the base shown in the image below. Then put the horse on and thats it! Youre done and ready to solve the puzzle!  To unlock the tail drawer, you must insert the key onto the ladder like this