Super Mario Bros - Luma Kit Card

Bring the magic of Lumas to life with this Luma kit card!   This model prints flat and transforms into a fully assembled ~25-35mm (depending on size chosen) display figurine of Luma that can stand on its own. It takes a measly 3g of filament and 17 minutes! to print! Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing  Beginner-friendly assembly Accurate proportions inspired by the classic Luma design NO AMS REQUIRED! Printing Notes: This kit card requires NO AMS. There is a color switch implemented in all profiles to change the color either manually or by AMS to Black. Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. Assembly Notes: There are a grand total of 6 pieces. The small connectors are all throwaways Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below, though hopefully most pieces are self explanatory! Assembly PDF included as well. Enjoy! Bonbon Notes: The instructions are intended to print 4x on 1 8.5x11 piece of paper, with each set landing ~2x2in square The instructions can be folded as an accordeon as shown in the pictures for a better fit inside the BONBON capsule Remember to include the instructions within the capsule!!