AMPER - Retro Radio Toddler Lock Socket Cover

📻 AMPER - Retro Radio Toddler Lock Socket Cover Tired of ugly wall outlets, messy power strips, and loose cables spoiling your interior? AMPER transforms exposed wall sockets into a functional piece of mid-century modern decor. Styled after classic vintage tabletop radios, it seamlessly blends into your home while keeping live outlets safely out of reach. Designed for easy single-color or multi-color printing with zero external hardware required for the body assembly. 📸 Overview & Features Covers 23.5x19.5x8.5 cm socket box. Toddler-Proof Cable Protection: Completely covers exposed wall outlets. The front mesh panel uses a tight friction fit to prevent toddlers from pulling it open, while functional, rotatable knobs give little hands a safe, satisfying element to play with. Smart Cable Access: To plug or unplug devices, simply slide the mesh panel up, route your cable through the top groove, adjust through the mesh opening, and slide the panel back down into its tracks. Authentic Vintage Aesthetic: Dual-knob layout, detailed frequency dial face, and a sliding speaker grille pattern. 🖨️ Print Settings & Assembly Tips SettingRecommendationSupportsRequired on Main Body & Mesh GroovesMesh Scale99.6% (Default friction fit)MaterialPLA / PETG💡 Support & Finish Notes: Mesh Panel Grooves: Supports inside the sliding grooves require careful removal and light filing/sanding. Do not skip these supports—the printing orientation is essential for structural integrity. Middle Horizontal Bar (Wood Texture Artifact): Depending on your support interface distance, the support interface under the middle bar may leave slight layer-line separation. This is a deliberate feature! It creates an authentic, subtle wood-grain texture that enhances the vintage radio look.Prefer a completely clean line? Simply tune your top support distance / interface layers tighter in your slicer. Friction Fit Tuning: The mesh panel is pre-scaled to 99.6%. If your printer's flow rate or material shrinkage makes it too loose or too tight, adjust the scaling in 0.1% increments (e.g., 99.5% or 99.7%) to achieve your ideal toddler-resistant resistance. 🔩 Mounting Instructions For maximum safety against toddler pulls, AMPER anchors directly to your shelf or media unit: Assemble all internal/body parts (do not slide the mesh panel in yet). Position the shell against the wall over your outlet/cables and mark the four leg peg locations on your shelf. Drill pilot holes into the shelf at the marked points. Drive 4 screws down through the internal leg peg guides into the shelf. Plug in your devices, pass the cables through the top groove, and slide the mesh panel down to lock everything securely.