Parametric & Print In Place | Travel Organiser Box

Keep your travel essentials organised with this fully parametric Travel Organiser Box. Designed for makers and travelers alike, this storage case features a secure magnetic lid, a magnetic locking mechanism, and customizable internal compartments that can be tailored to your needs. Whether you're carrying electronics, accessories, or everyday essentials, you can easily adapt the box dimensions and layout before printing. ✨ Features Parametric design Magnetic lid for secure closing Magnetic lock that snaps into both open and closed positions Customizable outer dimensions Adjustable internal compartment layout Clean, minimal design Beginner-friendly print Printing Notes Print the test tool and check the magnet holes before the main print No supports required Print orientation: Print In Place Parametric Settings Box Dimensions main_side – overall length short_side – overall width height – overall height Internal Layout wide_section_depth – depth of the larger compartment sections_height – compartments height top_section_size – size of the upper compartment bottom_section_size – size of the lower compartment Hardware magnets_horizontal_tolerance – horizontal clearance for magnets magnets_vertical_tolerance – vertical clearance for magnets The model is designed for Ø6 × 2 mm neodymium magnets, the tolerances can be adjusted to suit your magnets and printer calibration.   Assembling By using the included tool, insert magnets into the Lock element  Insert the lock into the organiser and place the magnets (the polarity will be defined by the already placed magnets in the lock)  By using the tool, push magnets into the holes  Insert magnets into the vertical organiser's holes; use the tool to secure them in the holes  Add magnets and close the side  Do the same with the lid magnets