DrakeHook – Dragon Carabiner

DrakeHook – Dragon Carabiner Bring a little dragon spirit to your everyday carry with DrakeHook, a lightweight dragon-shaped carabiner that's as fun to print as it is to use. Designed for quick printing and clean multi-colour results, it's perfect for backpacks, pouches, gear bags, and other light-duty applications.  Tested to 20 kg static load. The actual breaking strength may be higher, but only 20 kg has been verified. Disclaimer The 20 kg value is based on my own testing and is provided for reference only. It is not a certified load rating. Do not use this model for: Climbing or mountaineering Personal fall protection Safety equipment Lifting people Any application where failure could cause injury or damage This model is intended for everyday carry, backpacks, pouches, and other light-duty uses only. Print Instructions For the best combination of strength and durability, I recommend printing DrakeHook in PETG.   Strength Settings: Wall loops: 4 Embed walls into infill: Enabled Sparse infill: 25% Infill pattern: Gyroid Speed Settings: Initial layer: 50 mm/s Initial layer infill: 50 mm/s Outer wall: 100 mm/s Travel: 200 mm/s   Boost MeIf you enjoyed printing DrakeHook and found it useful, I'd really appreciate a 👍 Like, a ⭐ Rating, or a 🚀 Boost. Your support helps me create and share more free models with the community. Thank you!  Happy printing!