Pokemon Card Holder - Second Generation Pokedex

This is the 2nd Generation Johto Pokedex.    I made the top and side covers both magnetic. For the top, The you place the magnets in the black covers before press fiting it into the red top (See Assembly). I've set pauses in the print to insert magnets for the RedMain and the RedSide. Glue is required to ensure the magnets stay in place. Most parts can be pressed in but some parts may require glue.    Assembly: 6 Round magnets are required  Note: To connect the hinges, you connect one side of it to the side that doesn't have a cutout then press in the side that has the cutout. Ensure that all magnets are facing the right direction Press in all the parts into the respective locations (Glue is required for certain parts) Place magnets in while ensuring it's the correct direction before pressing it in. Model Details:  Width: 9.45 cm Depth: 2.03 cm Height: 15.2 cm Printing notes: Glue Required Ensure a clean build plate before each print Every part is printed in 0.2 mm layer height and 5% gyroid infill Supports are required