Jimothy – Raccoon Cartoon Figure

Meet the cartoon version of Jimothy! This model is a cute, exaggerated cartoon rendition of the real Jimothy, complete with oversized eyes. Two versions are included: Single-color version – The quickest and easiest option. At a 0.20 mm layer height, it takes approximately 2 hours to print in PLA. Four-color version – Brings Jimothy’s gray, black, white, and detailed eyes to life. Important Multicolor Printing Note The four-color version requires a large number of color changes. It will take a very long time and produce significant purge waste when printed on a traditional single-nozzle multicolor printer. For the four-color version, I recommend using a Bambu Lab H2C or another printer capable of faster, more efficient multi-material printing. The single-color version is the better choice for a quick print or for anyone who wants to paint Jimothy afterward. Printing Information Recommended material: PLA Approximate finished height: 100 mm Single-color and four-color versions included Approximately 2 hours for the single-color version at 0.20 mm Clean the build plate before printing to ensure good adhesion around the feet Print your own cartoon version of Seattle’s most recognizable raccoon—and please share a photo of your finished Jimothy!