Ribbed Japandi Bathroom Trash Can – Swing-Top Lid

Update: By request, I’ve added a compact version measuring Ø 105 × 135 mm—perfect as a small bathroom bin for cotton pads and dental floss or as a desktop bin for small scraps. _____________________________________________________   Bring a clean Japandi touch to an everyday essential. This compact bathroom trash can combines a finely ribbed body with smooth top and bottom sections, creating a modern design that fits beautifully into both minimalist and cozy interiors.   Designed primarily as a bathroom trash can, it is also a practical choice for the kitchen, office, bedroom, or craft room.   The swing-top lid opens easily in either direction. A weighted section on its underside acts as a counterbalance, automatically returning the lid to its centered closed position after use.   A small trash bag can be easily fitted and securely held in place beneath the removable top cover.   Dimensions   Outer diameter: 210 mm Inner diameter: 187 mm Height: 260 mm   Simple Three-Part Assembly   The trash can consists of just three printed parts: the main body, the swing lid, and the top collar.   Place the two pivot tabs of the swing lid into the matching recesses at the top of the main body. Slide the top collar over the main body until it is fully seated. The collar securely captures the pivot tabs and keeps the lid in position while allowing it to swing freely.   No screws, glue, or additional hardware are required.   Printing   All three parts print completely without supports. A ready-to-use print profile is included.   Main body and top collar: 2 walls, 5% Gyroid infill Swing lid: 2 walls, 25% Gyroid infill   The higher infill of the swing lid is intentional: it gives the weighted underside enough mass to return the lid reliably to its closed position.   Boost MeThank you for your support! :)